Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Cruise Control System) >> Removal And Installation >> Speed Control Cable >> Removal And Installation >> Vehicles with 4.0L engine

Vehicles with 4.0L engine

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Accelerator Control Splash Shield Bolts
GF0010789Courtesy of FORD MOTOR CO.
  1. Remove the 3 bolts and the accelerator control splash shield.
    2. Fig 2: Separating Speed Control Cable From Intake Manifold
    GF0010790Courtesy of FORD MOTOR CO.
  2. Separate the speed control cable from the intake manifold.
    1. Disconnect the cable from the throttle lever.
    2. Press the locking tabs and separate the speed control cable from the intake manifold.
scientia non olet · About Mike's Workshop Manuals