Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Cruise Control System) >> Diagnostic Tests >> Speed Control >> Pinpoint Tests >> Pinpoint Test F: Flash Code 4 - Vehicle Speed Signal Circuit Failure >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

The vehicle speed signal is sent from the powertrain control module (PCM) to the speed control actuator through circuit VMCO5 (VT/OG).

Possible Causes

scientia non olet · About Mike's Workshop Manuals