Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 885 (Engine System - General Information) >> General Procedures >> Bearing Inspection

Bearing Inspection

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect bearings for the following defects:
    Fig 1: Inspecting Bearings For Damages
    G03885074Courtesy of FORD MOTOR CO.
    1. Cratering - fatigue failure
    2. Spot polishing - incorrect seating
    3. Imbedded dirt engine oil
    4. Scratching - dirty engine oil
    5. Base exposed - poor lubrication
    6. Both edges worn - journal damaged
    • One edge worn - journal tapered or bearing not seated
scientia non olet · About Mike's Workshop Manuals