Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> General Procedures >> Washer Hose Repair

Washer Hose Repair

  1. Locate and verify the leaking washer hose.
  2. Cut the hose cleanly and remove the damaged portion of the washer hose.
    3. Fig 1: Cutting Hose (With Specifications)
    GF0023869Courtesy of FORD MOTOR CO.
  3. Install a windshield washer hose adapter between the cut ends of the hose.
    4. NOTE: In difficult cases, clamping may be required.
  4. Install a segment of 6.4 mm (0.25 in) inside diameter black rubber hose over the ends of the washer hose, and clamp both ends of the rubber hose using spring clamps.
scientia non olet · About Mike's Workshop Manuals