Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Edge SEL Plus, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Auto Lock and Horn Chirp Programming >> Programming the Auto Lock Feature Using the Instrument Cluster Message Center

Programming the Auto Lock Feature Using the Instrument Cluster Message Center

NOTE: The auto lock feature can be activated or deactivated independently of the auto-unlock feature.
NOTE: The auto lock feature of the SJB can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to MODULE CONFIGURATION .
  1. Turn the ignition key from the OFF to the ON position.
  2. Press the SETUP button on the message center switch until AUTO LOCK <ON> OFF is displayed.
  3. Press the RESET button to select ON or OFF. If the auto locks are enabled, the message center will have brackets around the <ON> display. If the auto locks are disabled, the message center will have brackets around the <OFF> display.
scientia non olet · About Mike's Workshop Manuals