Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Cutaway 6.0 P >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Full Frame And Body Mounting >> General Procedures >> Frame Straightening

Frame Straightening

WARNING: Straightening of front frame rail convolute is prohibited.
  1. When straightening the frame, make sure the following requirements are met:
    • If heat is needed to straighten a frame member, keep the temperature below 650°C (1200°F) (a dull red glow).
    • Heat must be kept to a minimum area so that the hardness of the metal will not be affected.
    • Straightening must only be attempted on frames that fail to meet specifications of the diagonal checking method or where damage is apparent.
    • Straightening must be limited to components which are not severely bent.
scientia non olet · About Mike's Workshop Manuals