Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2007 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Overdrive Servo >> Installation

Overdrive Servo: Installation

  1. Install the overdrive servo piston assembly.
    1. Install the overdrive servo piston return spring.
    2. Install the overdrive servo piston assembly.
    2. Fig 1: Installing Overdrive Servo Piston Assembly
    GF0003532Courtesy of FORD MOTOR CO.
  2. Use the special tool to install the overdrive servo piston retaining ring.
    3. Fig 2: Locating Overdrive Servo Piston Retaining Ring
    GF0003530Courtesy of FORD MOTOR CO.
  3. Install the main control valve body. For additional information, refer to Main Control Valve Body .
    4. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM article. Failure to follow these instructions may result in serious personal injury.
  4. If equipped with fire suppression system, repower the system.
scientia non olet · About Mike's Workshop Manuals