Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2006 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Module Communications Network System >> Diagnosis And Testing >> Communications Network >> Inspection and Verification

Inspection and Verification

  1. Verify the customer concern.
  2. Visually inspect for obvious signs of electrical damage.
    VISUAL INSPECTION CHART

    Electrical
    • Smart junction box (SJB) fuse 8 (10A)
    • Wiring harness
    • Connections
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, connect the diagnostic tool to the data link connector (DLC) and select the vehicle to be tested from the diagnostic tool menu. If the diagnostic tool does not communicate with the vehicle:
    • check that the program card is correctly installed.
    • check the connections to the vehicle.
    • check the ignition switch position.
  5. If the diagnostic tool still does not communicate with the vehicle, GO to PINPOINT TEST J .
  6. GO to PINPOINT TEST PC .
DIAGNOSTIC TROUBLE CODE (DTC) CHART

DTC Description Source Action
U0073 CAN Bus Off-Transmit Error ABS Module GO to PINPOINT TEST G .
U0073 Control Module Communication Bus Off Audio Unit GO to PINPOINT TEST H .
U0073 Control Module Communication Bus Off Instrument Cluster GO to PINPOINT TEST G .
U0073 Control Module Communication Bus Off SJB GO to PINPOINT TEST H .
U1900 CAN Communication Bus Fault-Receive Error ABS Module GO to PINPOINT TEST G .
U1900 CAN Communication Bus Fault-Receive Error Audio Unit GO to PINPOINT TEST H .
U1900 CAN Communication Bus Fault-Receive Error Instrument Cluster GO to PINPOINT TEST G .
U1900 CAN Communication Bus Fault-Receive Error SJB GO to PINPOINT TEST H .
scientia non olet · About Mike's Workshop Manuals