Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2006 >> Explorer 4.0 E, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Accessories Control Systems >> Remote Convenience System >> General Procedures >> Universal Transmitter Programming >> Erasing Channels

Erasing Channels

    NOTE: Individual channels cannot be erased, but can be programmed using the procedures for programming. For additional information, refer to UNIVERSAL TRANSMITTER PROGRAMMING  in this section.
  1. To erase all 3 programmed channels, hold down the 2 outside buttons until the red light begins to flash (20-30 seconds). Release both buttons.
scientia non olet · About Mike's Workshop Manuals