Audio Unit and Audio Unit With Navigation
WARNING: This page is about a different car, the 2006 Mercury Mountaineer and 2006 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
The audio unit and the audio unit with the navigation system (if equipped) uses the medium speed CAN for communication with the diagnostic tool and other modules on the medium speed CAN.
Check the medium speed CAN circuits between the audio unit C290b and the DLC C251. The total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms, there is an open circuit in the medium speed CAN, damage to the DLC C251, damage to audio unit C290b, or a problem to an in-line connector.
For additional audio unit information, refer to INFORMATION AND ENTERTAINMENT SYSTEM .
For additional navigation system information, refer to INFORMATION AND ENTERTAINMENT SYSTEM .