Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2006 >> Cutaway 6.8 S >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Vehicle Dynamic Systems >> Removal And Installation >> Stability Control Sensor Cluster >> Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the stability control sensor cluster electrical connector.
  3. Remove the 2 stability control sensor cluster bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  4. Remove the stability control sensor cluster.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals