Speed Control Deactivator Switch: Installation
WARNING: This page is about a different car, the 2006 Mercury Mountaineer and 2006 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When installing the speed control deactivator switch it is automatically self-adjusting to the proper position. Do not pull up or push down on the pedal during installation. Initial installation of the speed control deactivator switch allows for one adjustment. If additional adjustments are necessary, install a new switch.
- Install the speed control deactivator switch, and rotate clockwise 45 degrees.
- Connect the speed control deactivator switch electrical connector.