Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2005 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Engine Emission Control System >> Removal And Installation >> Exhaust Gas Recirculation (EGR) System Module Tube >> Removal and Installation

Removal and Installation

  1. Disconnect the EGR system module-to-exhaust manifold tube upper fitting.
    • To install, tighten to 39 Nm (29 lb-ft).
  2. Disconnect the EGR system module tube-to-exhaust manifold tube lower fitting and remove the tube.
    • To install, tighten to 39 Nm (29 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals