Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2005 >> Expedition RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 456 (Automatic Transaxle/Transmission External Controls) >> Removal And Installation >> Selector Lever Button >> Removal

Selector Lever Button: Removal

WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a small screwdriver in the slot at the bottom of the ring and slide the button assembly out and remove it from the knob.
    Fig 1: Locating Selector Lever Ring Slot
    G04628939Courtesy of FORD MOTOR CO.