Removal and Installation

All vehicles

Remove the driver side air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM .

Expedition

Remove the speed control switch.
1. Disconnect the electrical connector.
2. Remove the screws.
  
  Fig 1: Removing Speed Control Switch
  Courtesy of FORD MOTOR CO.

Navigator

Remove the horn switch.
1. Disconnect the electrical connector.
2. Remove the bolts.
  
  Fig 2: Removing Horn Switch
  Courtesy of FORD MOTOR CO.
Remove the speed control switch.
1. Disconnect the wiring harness locators.
2. Remove the screws.
  
  Fig 3: Removing Speed Control Switch (Navigator)
  Courtesy of FORD MOTOR CO.

All vehicles

To install, reverse the removal procedure.