Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2005 >> Expedition 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Speed Control Deactivator Switch >> Installation

Speed Control Deactivator Switch: Installation

NOTE: The speed control deactivator switch is self-adjusting. Do not pull up or push down on the pedal during installation. The switch will only self-adjust one time and allows for only the initial installation. If further adjustments become necessary, a new switch must be used.
  1. Install the speed control deactivator switch, and rotate clockwise 45 degrees.
  2. Connect the speed control deactivator switch electrical connector.
scientia non olet · About Mike's Workshop Manuals