|
|
|
|
|
|
|
|
- Radiator hoses or clamps.
|
|
|
|
|
|
|
|
|
|
|
|
|
- Coolant crossover gaskets (intake manifold).
|
- Heater return tube O-ring seal.
|
|
|
|
|
|
|
- Internal engine coolant leak.
|
|
|
|
|
|
|
|
|
- Insufficient water or coolant in coolant mixture.
|
|
|
|
|
|
|
- The engine does not reach normal operating temperature
|
|
|
- The block heater does not operate correctly
|
- Block heater power cable.
|
- CHECK the resistance of all three circuits in the power cable. If any circuit measures greater than 5 ohms, INSTALL a new power cable.
|
|
|
- CHECK the resistance of the block heater. If it does not measure between 12.5 and 17 ohms, INSTALL a new block heater.
|