Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Powertrain DTC Charts And Description - (Hybrid) >> Diagnostic Trouble Code (DTC) Charts and Descriptions >> DTC P0602: Control Module Programming Error

DTC P0602: Control Module Programming Error

P0602 - CONTROL MODULE PROGRAMMING ERROR

Description:  This DTC indicates a programming error within the vehicle ID (VID) block.
Possible Causes: 
  • VID data corrupted by the diagnostic tool during VID reprogramming.
Diagnostic Aids:  Using the diagnostic tool, reprogram the VID block. If the PCM does not allow reprogramming of the VID block, reflashing the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All The Vehicle ID (VID) Block must reprogrammed. For instructions, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
scientia non olet · About Mike's Workshop Manuals