Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Diagnostic Methods - (Hybrid) >> Flash Electrically Erasable Programmable Read Only Memory (EEPROM) >> PCM Reprogramming

PCM Reprogramming

At certain times, the entire EEPROM needs to be completely reprogrammed. This is due to changes made to the strategy or calibration after production or the need to reset the VID block because it has reached its limit. Refer to PCM/Module Reprogramming on the diagnostic tool.

NOTE: After the PCM is successfully reprogrammed, clear any TCM DTCs that may have been stored during reprogramming.
scientia non olet · About Mike's Workshop Manuals