Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2005 >> Cutaway 6.0 P >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Anti-Lock Control >> Diagnosis And Testing >> Anti-Lock Control >> Pinpoint Tests >> Pinpoint Test J: DTC C1676 >> Testing

Pinpoint Test J: DTC C1676: Testing

  1. J1 CHECK FOR POWER AT THE ANTI-LOCK BRAKE SYSTEM (ABS) MODULE 
    • Key in OFF position.
    • Disconnect: ABS Module C135.
    • Key in ON position.
    • Measure the voltage between the ABS module and ground as follows:
      ABS MODULE CONNECTOR-PIN AND CIRCUIT

      ABS Module Connector-Pin Circuit
      C135 pin 9 532 (OG/YE)
      C135 pin 25 532 (OG/YE)
      C135 pin 16 601 (LB/PK)
      Fig 1: Measuring Voltage Between ABS Module And Ground
      G03891581Courtesy of FORD MOTOR CO.
    • Is the voltage greater than 10 volts? 
scientia non olet · About Mike's Workshop Manuals