Anti-Theft System Instrument Cluster Diagnostic Trouble Code (DTC) List
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Source | Perform Test |
|---|---|---|---|
| B1213 | Anti-Theft Number of Programmed Keys is Below Minimum | Instrument Cluster | Go to PINPOINT TEST C . |
| B1600 | PATS Ignition Key Transponder Signal is Not Received | Instrument Cluster | Go to PINPOINT TEST F . |
| B1601 | PATS Received Incorrect Key-Code From Ignition Key Transponder | Instrument Cluster | Go to PINPOINT TEST G . |
| B1602 | PATS Received Invalid Format of Key-Code From Ignition Key Transponder | Instrument Cluster | Go to PINPOINT TEST H . |
| B1681 | PATS Transceiver Module Signal is Not Received | Instrument Cluster | Go to PINPOINT TEST I . |
| B2103 | Antenna Not Connected | Instrument Cluster | Go to PINPOINT TEST J . |
| B2139 | Data Mismatch (Receive Data Does Not Match What Was Expected) | Instrument Cluster | Go to PINPOINT TEST D . |
| B2141 | NVM Configuration Failure | Instrument Cluster | Go to PINPOINT TEST E . |
| U1147/U1262 | Data Mismatch 2 (Receive Data Does Not Match What Was Expected) | Instrument Cluster | Go to PINPOINT TEST D . |
| B2431 | Transponder Programming Failed | Instrument Cluster | Go to PINPOINT TEST F . |