Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2004 >> Thunderbird >> Repair and Diagnosis >> External Pages >> Different car >> Section 311 (Driveline System) >> Disassembly And Assembly >> Rear Axle Assembly >> Material

Rear Axle Assembly: Material

WARNING: This page is about a different car, the 2004 Lincoln Aviator. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL CHART

Item Specification
Premium Long Life Grease XG-1-C ESA-M1C75-B
Threadlock and Sealer E0AZ-19554-AA WSK-M2G351-A5
Stud and Bearing Mount E0AZ-19554-BA WSK-M2G349-A1
  1. Position the vehicle on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the rear axle assembly. For additional information, refer to REAR AXLE ASSEMBLY .
  3. Remove the parts in the order indicated in the following illustration and table.
    Fig 1: Disassemble Order Of Rear Axle Assembly Components (1 Of 2)
    G03263317Courtesy of FORD MOTOR CO.
    Fig 2: Disassemble Order Of Rear Axle Assembly Components (2 Of 2)
    G03263318Courtesy of FORD MOTOR CO.
  4. To assemble, reverse the disassembly procedure.
  5. Fill the axle with the specified quantity of the specified lubricant.
scientia non olet · About Mike's Workshop Manuals