Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2004 >> Thunderbird >> Repair and Diagnosis >> External Pages >> Different car >> Section 235 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Reverse Servo Assembly >> Removal and Installation >> Notes

Removal and Installation: Notes

WARNING: This page is about a different car, the 2003 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The transmission fluid pan gasket is reusable. Clean and inspect for damage. If not damaged, the gasket should be reused.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the components in the order indicated in the following illustration and table.
    Fig 1: Reverse Servo Assembly Removal Sequence
    G01528990Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
  4. Partially fill the transmission. For additional information, refer to TRANSMISSION FLUID DRAIN AND REFILL - WITHOUT TORQUE CONVERTER DRAIN PLUG .
scientia non olet · About Mike's Workshop Manuals