Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2004 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 407 (Cruise Control System) >> Removal And Installation >> Speed Control DEACTIVATOR Switch >> Removal

Speed Control DEACTIVATOR Switch: Removal

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the deactivator switch.
    1. Disconnect the electrical connector.
    2. Rotate counterclockwise 45 degrees and remove the deactivator switch.
      Fig 1: Identifying Speed Control Deactivator Switch
      G01576614Courtesy of FORD MOTOR CO.