Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2004 >> Taurus SES, 3.0 2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Charging System - Generators & Regulators) >> On-Vehicle Testing >> Generator Load Test

Generator Load Test

WARNING: This page is about a different car, the 2003 Mercury Sable, 2003 Ford Taurus, 2002 Mercury Sable, and 2002 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

Ensure drive belt is in good condition. Replace belt as necessary. If belt is okay, connect charging system load tester in accordance with manufacturer's instructions. Start and run engine at 2000 RPM, and apply load until generator output levels off. Generator amperage should be at least 87 amps with engine at 2000 RPM. Go to next step. If output is not as specified, see SYMPTOM INDEX  table under SYSTEM TESTS.

scientia non olet · About Mike's Workshop Manuals