Cylinder Head Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER HEAD SPECIFICATIONS
| Description | Specification |
|---|---|
| Maximum distortion (mating surface) | 0.1 mm |
| Height of mating surface | 1.76 mm-2.12 mm |
| Peak-to-valley height of mating surface (reference length 2.5 mm vertical to groove direction) | R 3z = 6.0 microns |
| Oil pressure at 800-850 rpm | 1.3 bar-2.5 bar |
| Oil pressure at 4000 rpm | 3.7 bar-5.5 bar |