Special Tool(s)
WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOL CHART
| Remover, Camshaft Pulley 303-098 (T74P-6256-B) |
|
| Installer, Crankshaft Rear Main Oil Seal 303-328 (T88P-6701-B1) |
|
| Alignment Plate, Camshaft 303-465 (T94P-6256-CH) |
|
| Timing Pin, Cylinder No. 1 TDC 303-574 (T97P-6000-A) |
|
| Installer, Camshaft Oil Seal 303-160 (T81P-6292-A) |
|
| Holding Tool, Flywheel 303-103 (T74P-6375-A) |