Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2004 >> Cutaway 5.4 L >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls- Gasoline Engines >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal and Installation

Removal and Installation

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .
  3. Disconnect the powertrain control module (PCM) electrical connector.
    Fig 1: Disconnecting Powertrain Control Module (PCM) Electrical Connector
    G02761793Courtesy of FORD MOTOR CO.
  4. Remove the PCM.
    1. Remove the nuts.
    2. Remove the cover.
    3. Remove the PCM.
    Fig 2: Removing PCM
    G02761794Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals