Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle/Transmission) >> In-Vehicle Repair >> Differential Fluid Seals >> Removal

Differential Fluid Seals: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission case plug and washer and drain the transmission fluid. Discard the washer.
    Fig 1: Removing Transmission Case Plug And Washer
    G01371681Courtesy of FORD MOTOR CO.
  2. Remove the halfshafts; refer to AXLE SHAFTS .
  3. Carefully pry the differential seal from the transmission case.
    Fig 2: Identifying Differential Seal
    G01371682Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals