Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transaxle/Transmission External Controls) >> Removal And Installation >> Bezel - Transmission Control Selector Dial >> Removal

Bezel - Transmission Control Selector Dial: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the knob; refer to KNOB - GEARSHIFT LEVER .
  2. Remove the floor console; refer to INSTRUMENT CLUSTER AND PANEL ILLUMINATION .
  3. Remove the screws from the transmission control selector dial bezel.
    Fig 1: Removing Screws From Transmission Control Selector Dial Bezel
    G01372258Courtesy of FORD MOTOR CO.
  4. Disconnect the indicator lamp socket and remove the bezel.
Fig 2: Disconnecting Indicator Lamp Socket And Remove Bezel
G01372259Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals