Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 222 (Engine-3.0L) >> In-Vehicle Repair >> Exhaust Gas Recirculation (EGR) Valve >> Step 7: EGR Valve System Module Gasket Installation Note

Step 7: EGR Valve System Module Gasket Installation Note

WARNING: This page is about a different car, the 2003 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs, or other abrasive means to clean the sealing surfaces. These tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of gasket material.
  1. Clean the EGR valve system module gasket mating surfaces. Install a new gasket.
scientia non olet · About Mike's Workshop Manuals