Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - Ax4S) >> Disassembly And Assembly Of Subassemblies >> Planet Assembly >> Assembly

Planet Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the reverse planet.
    Fig 1: Installing Reverse Planet
    G01575361Courtesy of FORD MOTOR CO.
  2. Install the No. 13 needle bearing.
    Fig 2: Installing Needle Bearing
    G01575362Courtesy of FORD MOTOR CO.
  3. Install the front planet gear assembly.
    Fig 3: Installing Front Planet Gear Assembly
    G01575363Courtesy of FORD MOTOR CO.
    Fig 4: Installing Retaining Ring To Rear Ring Gear
    G01575364Courtesy of FORD MOTOR CO.
  4. Install the retaining ring to the rear ring gear.
scientia non olet · About Mike's Workshop Manuals