Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - Ax4S) >> Disassembly And Assembly Of Subassemblies >> Overdrive Servo >> Assembly

Overdrive Servo: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install a new servo cover seal.
    Fig 1: Installing Servo Cover Seal
    G01575391Courtesy of FORD MOTOR CO.
  2. Inspect overdrive piston and seal assembly.
    Fig 2: Inspecting Overdrive Piston And Seal Assembly
    G01575392Courtesy of FORD MOTOR CO.
  3. Install the overdrive servo piston and rod assembly.
    Fig 3: Installing Overdrive Servo Piston And Rod Assembly
    G01575393Courtesy of FORD MOTOR CO.
  4. Install the overdrive servo piston return spring.
    Fig 4: Installing Overdrive Servo Piston Return Spring
    G01575394Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals