Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - Ax4S) >> Disassembly And Assembly Of Subassemblies >> Low And Intermediate Servo >> Disassembly

Low And Intermediate Servo: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the spring retainer.
    Fig 1: Removing Spring Retainer
    G01575381Courtesy of FORD MOTOR CO.
  2. Remove the spring.
    Fig 2: Removing Spring
    G01575382Courtesy of FORD MOTOR CO.
  3. Remove the servo and rod from the cover.
    Fig 3: Removing Servo And Rod From Cover
    G01575383Courtesy of FORD MOTOR CO.
  4. Remove the retaining clip.
    Fig 4: Removing Retaining Clip
    G01575384Courtesy of FORD MOTOR CO.
  5. Remove the servo piston and spring.
    Fig 5: Removing Servo Piston And Spring
    G01575385Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals