Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - Ax4S) >> Disassembly And Assembly Of Subassemblies >> Low And Intermediate Servo >> Assembly

Low And Intermediate Servo: Assembly

WARNING: This page is about a different variant/trim than selected.
    NOTE: During the assembly procedure lubricate the seals with petroleum jelly.
    Fig 1: Installing Servo Piston Seal
    G01575386Courtesy of FORD MOTOR CO.
    Fig 2: Installing Cover Seal And Gasket
    G01575387Courtesy of FORD MOTOR CO.
  1. To assemble, reverse the disassembly procedure. Install a new servo piston seal, cover seal, and gasket.
scientia non olet · About Mike's Workshop Manuals