Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission - Ax4S) >> Disassembly And Assembly Of Subassemblies >> Driven Sprocket Support >> Disassembly

Driven Sprocket Support: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the Teflon® seal rings and the No. 5 thrust washer.
    Fig 1: Removing Teflon® Seal Rings And Thrust Washer
    G01575244Courtesy of FORD MOTOR CO.
  2. Using the special tools, remove the bearing.
    Fig 2: Removing Bearing
    G01575245Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals