Removal and Installation

All Vehicles 

1. Using the special tool, pull out the integrated control panel (18C858).
   Fig 1: Removing Integrated Control Panel (18C858)

   Courtesy of FORD MOTOR CO.

   Vehicles With Manual Climate Control 

2. Label and disconnect the electrical connectors.

   Remove the integrated control panel.

   Fig 2: Locating Electrical Connectors

   Courtesy of FORD MOTOR CO.

   Vehicles With Electronic Automatic Temperature Control (EATC) 

3. Label and disconnect the electrical connectors and the in-car temperature sensor hose (19D888). Remove the integrated control panel.
   Fig 3: Removing Integrated Control Panel

   Courtesy of FORD MOTOR CO.

   All Vehicles 

4. To install, reverse the removal procedure.