Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine - 7.3L Diesel) >> In-Vehicle Repair >> Fuel Line Disconnect Fittings >> Installation (Push Lock Coupling)

Installation (Push Lock Coupling)

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect push lock coupling for any internally damaged components before installing. If any internal components are damaged, replace fuel line.
  2. Ensure fuel lines and push lock coupling are clean. Push fuel lines together until click sound is heard. Pull on both fuel lines to ensure push lock coupling is properly locked together. Push retaining clip downward on to push lock coupling.
Fig 1: Identifying, Removing & Installing Spring Lock Coupling
G97I03781Courtesy of FORD MOTOR CO.
Fig 2: Identifying, Removing & Installing Push Lock Coupling
G97C03783Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals