Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Explorer 4.0 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Engine System-General Information) >> General Procedures >> Connecting Rod - Bushing Diameter

Connecting Rod - Bushing Diameter

WARNING: This page is about a different car, the 2004 Mercury Marauder, 2004 Mercury Grand Marquis, and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the inner diameter of the connecting rod bushing, if equipped. Verify the diameter is within specification.
    • Refer to the appropriate ENGINE article for more information.
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G02753848Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals