Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 275 (Window And Glass) >> Removal And Installation >> Window Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The removal and installation procedures for all window control switches are similar.
  1. Remove the front door trim panel or the rear door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Release the locking clips and remove the window control switch.
    Fig 1: Releasing Locking Clips And Remove Window Control Switch
    G02201912Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.