Body Support-Rear, SuperCab, Upper: Removal
-
NOTE: When removing upper body insulators, all other body mount support bolts must be loose before raising the vehicle cab to prevent permanent structural damage from occurring to the vehicle cab.
Remove the rear lower body insulator; for additional information, refer to BODY SUPPORT-REAR, SUPERCAB, LOWER in this section.
- Remove and discard the opposite side rear body insulator bolt; for additional information, refer to BODY SUPPORT-REAR, SUPERCAB, LOWER in this section.
- Remove and discard the left and right front body insulator bolts; for additional information, refer to BODY SUPPORT-FRONT LOWER in this section.
- Raise the vehicle cab enough to allow removal of the insulator.
- Remove the insulator.