Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Body System - Full Frame And Body Mounting -- Excursion >> Removal And Installation >> Body Support-Rear, Regular Cab, Lower >> Removal

Body Support-Rear, Regular Cab, Lower: Removal

  1. Move the front seat forward.
  2. Move the front seatback forward.
  3. If equipped, remove the utility tray behind the seat; for additional information, refer to INTERIOR TRIM & ORNAMENTATION -- EXCURSION & F250-F550 SUPER DUTY .
  4. Pull the carpet, or mat back to see the rear body insulator bolt head.
  5. Remove and discard the bolt.
    Fig 1: Locating Bolt
    G12743921Courtesy of FORD MOTOR CO.
  6. Remove the insulator.
    Fig 2: Locating Insulator
    G12743918Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals