Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Body System - Full Frame And Body Mounting -- Excursion >> Removal And Installation >> Body Support-Rear, Crew Cab, Lower >> Removal

Body Support-Rear, Crew Cab, Lower: Removal

  1. Remove the rear door scuff plate; for additional information, refer to INTERIOR TRIM & ORNAMENTATION -- EXCURSION & F250-F550 SUPER DUTY .
  2. Remove the rear seat; for additional information, refer to SEAT SYSTEM -- EXCURSION & F250-F550 SUPER DUTY .
  3. If equipped, remove the utility tray from behind the rear seat; for additional information, refer to INTERIOR TRIM & ORNAMENTATION -- EXCURSION & F250-F550 SUPER DUTY .
  4. Pull the carpet or mat back to expose the lower body insulator bolt head.
  5. Remove and discard the bolt.
    Fig 1: Locating Bolt
    G12743921Courtesy of FORD MOTOR CO.
  6. Remove the insulator.
    Fig 2: Locating Insulator
    G12743918Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals