Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2003 >> Excursion 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Engine Controls - Removal & Installation) >> Fuel Systems >> Fuel System Pressure Release >> 2.0L

Fuel System Pressure Release: 2.0L

WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel filler cap to release fuel tank pressure. Remove fuel pump relay, located in left side engine compartment relay panel. Start engine and allow to idle until engine stalls. Crank engine twice to ensure system pressure is released. Turn ignition off. Install fuel pump relay.

scientia non olet · About Mike's Workshop Manuals