Manual HVAC Systems: Specifications

WARNING: Vehicle is equipped with Supplemental Inflatable Restraint (SIR) system. When servicing vehicle, use care to avoid accidental air bag deployment. SIR system-related components are located in various locations throughout interior and exterior of vehicle, depending on application. Do not use electrical test equipment on or near these circuits. If necessary, deactivate SIR system before servicing components. See appropriate AIR BAG RESTRAINT SYSTEMS article in RESTRAINTS.

SPECIFICATIONS

Application

Specification

Compressor Type

Ford FS 10

Compressor Belt Deflection

⁽¹⁾

Compressor Oil Capacity

⁽²⁾

System Oil Capacity ⁽³⁾

7 oz.

Refrigerant (R-134a) Capacity

25.6-26.6 oz.

System Operating Pressures

⁽⁴⁾

⁽¹⁾	Belt tension is automatically adjusted.

⁽²⁾

If the quantity of refrigerant oil taken from the compressor is less than 3 oz. (90 ml). Add 3 oz. (90 ml). If the quantity of refrigerant oil taken from the compressor is between 3 oz. (90 ml) and 5 oz. (150 ml). Fill with the same quantity plus one oz. (30 ml). If the quantity of refrigerant oil taken from the compressor is greater than 5 oz. (150 ml). Fill with the same quantity.

⁽³⁾	Use PAG MC YN-12 oil (F2AZ-19577-AC).

⁽⁴⁾	System operating pressures are not available from manufacturer.