Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2002 >> Expedition 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Power Windows) >> Removal & Installation >> Generic Electronic Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2001 Lincoln Navigator and 2001 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove lower instrument panel steering column cover. Remove bulkhead electrical connectors (C242 and C243) from central junction box.
  2. Unbolt and remove central junction box. Disconnect GEM/CTM electrical connectors. Remove screws and disconnect the GEM/CTM from the backside of the central junction box. To install, reverse removal procedure.
scientia non olet · About Mike's Workshop Manuals