Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Windows And Glass) >> Removal And Installation >> Window Control Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Use a shop towel or similar material between the tool and the door trim panel or damage to the door trim panel may occur.
  1. Release the clip and remove the door panel switch plate.
    • Disconnect the electrical connector.
  2. Release the tabs and remove the window control switch.
  3. To install, reverse the removal procedure.
scientia non olet · About Mike's Workshop Manuals