Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2001 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 886 (Engine System-General Information) >> General Procedures >> Connecting Rod Large End Bore

Connecting Rod Large End Bore

WARNING: This page is about a different car, the 2005 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • If out of specification, install new components as necessary.
      Fig 1: Measuring Connecting Rod Large End Bore
      G03946845Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals