Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Ford >> 2001 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Module Communications Network System -- Excursion & F250-F550 Super Duty) >> Removal & Installation >> 4-Wheel Drive Control Module

4-Wheel Drive Control Module

WARNING: This page is about a different car, the 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This module may require some configuration after replacement. See PROGRAMMING .

Disconnect negative battery cable. Open glove compartment. Bend in glove box stop tab to allow glove compartment to lower completely. Disconnect electrical connectors from 4-wheel drive control module. Remove 2 nuts and one bolt from the control module and remove 4-wheel drive control module. To install, reverse removal procedure.

scientia non olet · About Mike's Workshop Manuals