Pinpoint Test F: DTC C1267 - Abs Functions Temporarily Disabled

WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.

Test Step

F1 CARRY OUT THE RECALIBRATION PROCEDURE

Key in ON position.
Enter the following diagnostic mode on the diagnostic tool: Clear DTCs.
Enter the following diagnostic mode on the diagnostic tool: Retrieve DTCs.
Are any DTCs retrieved?

Yes

Go to Traction Control Module DTC Index . If DTC C1267 is retrieved again, INSTALL a new HCU. REFER to ANTI-LOCK CONTROL . REPEAT the self-test. TEST the system for normal operation.

TEST the system for normal operation.